Lamp Accessories

When Dealing with Electrical Items you are Strongly Recommended to Seek the Services of a Competent Electrician.
The Mains Electrical Items are sold assuming fitment will be carried out to a Safe & Legal Requirement, No Liability will be accepted as a result of substandard assembly.

PLEASE NOTE
Our 230 & 12 volt Electrical products are sourced from
reputable UK suppliers.
The Metric parts are not intermixable with American Imperial threads.

!

12v Power Supply
!
psu 12v
Buy in Bulk for Even Better Pricing. Checkout Discounts at Qty 10 & 25
This item enables you to use safe 12v bulbs in lighted items, especially for nursery items like night lights etc.
Comes with 2m of cable and
Conforms to BS1363 Clause 12

12v Socket Connector
!
dc socket
Bulk Pricing shown in Checkout at Qty 10 & 25 units
This fits to your base and enables the Power Supply to be plugged in.

Simply fitted but means of a plastic nut that tightens on your bisque piece.
Requires a 12mm diameter hole to be made in greenware prior to firing.

12v Bulbholder

!
mes lampholder

MES Type Bulbholder

This holder is used with our 12v Socket and PSU fitments

Simply glued to your base and wires connect to the 12v socket shown above

12v Bulb
!
MES Torch Type Bulb to fit our Bulbholder

Cable for 12v Units (30cms)
!
2 Core Cable
Supplied in 30cm Lengths

Multi Light String
!
multi light string

Battery operated string of 10 multi coloured lights
Takes 2 x AA Batteries
Case comes with a simple switch operation.

Lighthouse Lamp
!
lighthouse lamp
Single Blinking Light

This battery operated lamp has a single bulb that blinks just like a lighthouse beacon.

On/Off switch on battery housing. Leads are approx 8" long.

Round Oil Burner Resevoir
!
round oil burner

Suitable as an accessory to the DocHolliday range of Dragons & Sorcerers

Round Shape Approx 60mm Diameter with a base tail to aid fitment.
Includes wick

Oil Burner Reservoir
!
oil burner

Suitable as an accessory to the DocHolliday range of Dragons & Sorcerers

Teardrop Shape Approx 60mm Diameter with a base tail to aid fitment.
Includes wick

2 Core Switched Lighting Kit
!
2 core lighting set

This Kit includes a 2 Metre White Cable of 2 core flex with a 3amp fused Plug and an Inline Switch prefitted to the Cable along with a Clear 10mm Grommet for protecting the cable through the Ceramic Base.
The White Plastic Cord Grip (Legal Requirement) is placed through a 10mm Hole in your Lamp Base and the Black Plastic Lampholder is secured to the 2 flex wires and then screwed to the cord grip. Finally the SES Bulb is fitted to the Lampholder.

A 12mm Hole cut into Greenware will give you the correct size hole for this fitting when fired to Bisque.
We Stock this size Holecutter in our Greenware Tool Section should you require one.

2 Core Cable Plug & Switch
!
2 core cable & switch

2 Metre Cable with a Uk 3amp fused Plug and an In Line Switch already fitted, leaving just the connections to the Plastic Lamp Holder to be fitted.

Also requires a 10mm Cord Grip as this is a legal requirement for UK regulations.

10mm Cord Grip
!
10mm cord grip
This screws into the Lampholder and grips the power cable to ensure the connections cannot be pulled off unintentionally. This Grip is a Legal Requirement for UK Lighting Regulations.

Lampholder Plastic SES

!
ses lampholder

This Plain Outer Lined Plastic Lampholder takes a SES Fitting Pygmy Bulb and has enclosed Brass connectors.

Suitable for fitting to our 2 Core Cable Set

Bulb Shown for Illustration Purposes Only

10mm Grommet
!
10mm grommet
This slips over the cable prior to fitting the Cord Grip and is secured into the hole in your Ceramic Base to ensure the cable does not wear on the base.

15w Pygmy Bulb (SES)
!
15w pygmy bulb

This Pygmy Bulb has a SES fitting to compliment our Black plastic SES Lampholder for our 2 Core Kits